The Carpenter’s Tool Kit allows for the building and maintaining of wooden structures with no use of power. All of the tools in this kit are hand powered. The items can be used to either demolish or build small wooden structures as well as roofing. One of the really nice features of this kit is the 14” jack plane which allows for smoothing and squaring up. It has an adjustable blade and a 2” cutter. There is also a 5-1/2”pt Rip saw that comes from England. All 27 items fit into a tool chest that is provided with castors so that it can be portable should the need arise. Normally this kit is outfitted for 3 people, but can be customized. This kit is the same as GSA’s 5180-00-293-2873.
| 1 | 3 EA. | BAR, PINCH, 26” |
| 2 | 1 EA. | BAR, WRECKING, 12” |
| 3 | 2 EA. | BAR, WRECKING, 30” |
| 4 | 1 EA. | BEVEL, SLIDING T |
| 5 | 1 SE. | BIT SET, AUGER, 7 PC. |
| 6 | 1 EA. | BIT, AUGER, 7/16” x 18″ |
| 7 | 1 EA. | BIT, AUGER, 5/8” x 18″ |
| 8 | 1 EA. | BIT, EXPANSIVE |
| 9 | 1 EA. | BIT, SCREWDRIVER, #3 PHILLIPS |
| 10 | 1 EA. | BIT, SCREWDRIVER, #2 PHILLIPS |
| 11 | 1 EA. | BIT, SCREWDRIVER, #1 PHILLIPS |
| 12 | 2 EA. | BRACE, BIT, RATCHET |
| 13 | 1 EA. | CASE, TWIST DRILL |
| 14 | 1 EA. | COUNTERSINK, 5/8” |
| 15 | 2 EA. | CUTTER, GLASS |
| 16 | 1 EA. | DIVIDER, MECHANICS’ |
| 17 | 1 EA. | DRILL, HAND, and BITS (8) |
| 18 | 1 DZ. | DRILL, TWIST, 5/32” |
| 19 | 1 DZ. | DRILL, TWIST, 11/64” |
| 20 | 1 DZ. | DRILL, TWIST, 3/16” |
| 21 | 1 DZ. | DRILL, TWIST, 13/64” |
| 22 | 1 DZ. | DRILL, TWIST, 7/32” |
| 23 | 1 DZ. | DRILL, TWIST, 15/64” |
| 24 | 1 DZ. | DRILL, TWIST, 1/4” |
| 25 | 1 EA. | POINT DRIVER, GLAZIER’S |
| 26 | 2 EA. | FACE, HAMMER, INSERTED |
| 27 | 1 EA. | FILE, HAND, 8” FLAT SMOOTH |
| 28 | 1 EA. | FILE, HAND, 6” SLIM TAPER |
| 29 | 2 EA. | FILE, HAND, 6” TAPER |
| 30 | 1 EA. | FILE, 7” AUGER BIT |
| 31 | 1 EA. | FILING GUIDE, HAND SAW |
| 32 | 2 PR. | GOGGLES, INDUSTRIAL |
| 33 | 3 EA. | HAMMER, HAND, 20 oz. RIP |
| 34 | 3 EA. | HAMMER, HAND, 16 oz. RIP |
| 35 | 1 EA. | HAMMER, HAND, 3 lb. |
| 36 | 1 EA. | HANDLE, FILE, ADJUSTABLE |
| 37 | 2 EA. | HATCHET, HALF |
| 38 | 1 EA. | HOLDER, HAMMER 2″ |
| 39 | 3 EA. | KNIFE, CRAFTSMAN’S |
| 40 | 1 EA. | KNIFE, POCKET |
| 41 | 1 EA. | LEVEL & PLUMB, 24” |
| 42 | 1 EA. | OILER, HAND |
| 43 | 1 EA. | PADLOCK |
| 44 | 1 EA. | PLANE, BENCH, 14” |
| 45 | 2 EA. | PLIERS, LINEMAN’S, 8” |
| 46 | 1 EA. | PLUMB BOB, 16 oz. |
| 47 | 1 PG. | POINTS, GLAZIER’S |
| 48 | 1 EA. | SAW SET, HAND |
| 49 | 2 EA. | SAW, HAND, CROSSCUT |
| 50 | 2 EA. | SAW, HAND, RIP |
| 51 | 1 EA. | SAW, KEYHOLE |
| 52 | 1 EA. | SCREWDRIVER, #1 PHILLIPS |
| 53 | 1 EA. | SCREWDRIVER, #3 PHILLIPS |
| 54 | 1 EA. | SCREWDRIVER, #2 PHILLIPS |
| 55 | 1 EA. | SCREWDRIVER, FLAT TIP, 6” |
| 56 | 1 EA. | SCREWDRIVER, FLAT TIP, 4” |
| 57 | 1 EA. | SCREWDRIVER, FLAT TIP |
| 58 | 1 EA. | SCREWDRIVER, FLAT TIP, 8″ |
| 59 | 2 EA. | SQUARE, CARPENTER’S |
| 60 | 2 EA. | SQUARE, COMBINATION |
| 61 | 1 BX. | STAPLES, 3/8″ |
| 62 | 1 BX. | STAPLES, 1/2″ |
| 63 | 1 EA. | STONE, SHARPENING |
| 64 | 1 EA. | TACKER, STAPLE |
| 65 | 1 EA. | TAPE, MEASURING, 100 ft. |
| 66 | 1 EA. | TAPE, MEASURING, 25 ft. |
| 67 | 1 EA. | TOOL BOX, PORTABLE/CASTERS |
| 68 | 2 EA. | FIBROUS TWINE |
| 69 | 12 EA. | PENCIL, CARPENTERS |
| 70 | 1 EA. | ROLL, TOOL |
